D-Link ShareCenter Pulse User Manual
Page 67
Standard, JBOD, RAID 0 and RAID 1. This section covers
the JBOD configuration.
JBOD combines both hard drives in a linear fashion
which will create one large volume geared towards
maximum available space. Click ‘’.
The next window will display the volumes connected and
prompts that the RAID configuration will commence.
When ready click on the ‘’ button to initiate the
RAID configuration. This process will involve initializing,
formatting and configuration of the RAID chosen.
A warning message will be displayed before the
procedure starts stating that hard drives will be formatted
and if the user wishes to continue. Click ‘’ to continue.
After the configuration has completed the user will be
prompted to click on the ‘’ button.