Filter
Top Products
D-Link ShareCenter Pulse User Manual
Page 64
Enable or Disable HDD Hibernation settings.
Set the amount of idle time before the drives will go into
hibernation.
to shut down while power remains constant to the device. The drives will power up
again when data is accessed.
Enable or disable Power Recovery. The Power Recovery
feature will automatically restart your device from a
previously unexpected shutdown due to a power failure.
If using “Auto” mode, the speed of the fan will change
(Off/Low/High) depending on the internal temperature of
the enclosure.
Enable of disable the power off schedule and configure
the routine (Daily, Weekly or Monthly) and set the time.