Filter
Top Products
D-Link ShareCenter Pulse User Manual
Page 93
When a hard drive fails or becomes corrupted RAID 1 provides a the feature to enable the Auto Rebuild configuration. This configuration will take the information from one of
the existing hard drives and rebuild the new hard drive with the same information to get the RAID 1 configuration completed.
o view the hard drive status you can got to STATUS > SYSTEM
INFO and monitor the Sync Time Remaining field. If it displays
‘Completed’ the RAID 1 configuration is functioning normal.
However if it displays ‘Degraded’ then one of the hard drives have
either failed or is starting to fail.
This mean that the problematic hard drive needs to be replaced.
After the new hard drive is inserted into the ShareCenter Pulse
go to and you’ll now have the option to start the
process if Auto Rebuild was disabled from
the beginning. If Auto Rebuild was enabled from the beginning
the ShareCenter Pulse will start this Rebuilding process
automatically.
You can now click the button to
initiate the Auto Rebuilding process.