Filter
Top Products
D-Link ShareCenter Pulse User Manual
Page 91
It is recommended that you backup your important files before replacing or adding a new hard drive to the ShareCenter Pulse.
Please make sure the power is off before replacing a hard drive. After you have installed the new drive, turn on the ShareCenter Pulse and then connect to the Web UI. The
ShareCenter Pulse will prompt you to format the new drive (Standard, RAID 1 mode) or both drives (JBOD, RAID 0 mode).
The ShareCenter Pulse is able to work with one single hard drive under Standard mode. Please make sure the power is off before installing a second hard drive. After you
have installed the new drive, turn on the ShareCenter Pulse and then connect to the Web UI. The ShareCenter Pulse will prompt you to format the new drive.
Apart from logging into the web user interface using the normal http://192.168.0.32/, user can also login to the web configuration using secure https.
1) Open Internet Explorer and type https://192.168.0.32
2) Login to the ShareCenter Pulse as per normal.