Filter
Top Products
D-Link ShareCenter Pulse User Manual
Page 68
Standard, JBOD, RAID 0 and RAID 1. This section covers
the RAID 0 configuration.
RAID 0 combines both hard drives in a striped fashion
which will create one large volume geared towards
maximum performance. Click ‘’.
In this section the user can view the available capacity
that RAID 0 can use on the hard drives installed.
Then the user can configure the desired capacity to be
used for the RAID 0 configuration by entering the desired
capacity amount in the block provided.
To utilize the remaining space, (if the two HDDs differ
in capacity), the user can choose to use JBOD for the
remaining space. Tick this option is needed. Click ‘’.
The next window will display the volumes connected and
prompts that the RAID configuration will commence.
When ready click on the ‘’ button to initiate the
RAID configuration. This process will involve initializing,
formatting and configuration of the RAID chosen.
A warning message will be displayed before the
procedure starts stating that hard drives will be formatted
and if the user wishes to continue. Click ‘’ to continue.
After the configuration has completed the user will be
prompted to click on the ‘’ button.