Filter
Top Products
D-Link ShareCenter Pulse User Manual
Page 72
Scan Disk will scan your system’s file system for errors
and/or corruption. After completion, any errors on your
file system will be displayed accordingly.
echnology”. This is
a system on a hard drive used to monitor and report on the health of the drive. If the
HDD is grayed out, then it does not support S.M.A.R.T.
To run the S.M.A.R.T test, select the hard drive you wish
to perform the S.M.A.R.T test on. Then select whether
to run a Quick or Extended S.M.A.R.T test. Then press
“Start” to run the test.
Runs a quick S.M.A.R.T test. The test usually takes
less than 10 minutes. This test will check the electrical,
mechanical, and read performance
of the hard drive. The results are displayed as Passed/
Failed on the web UI and can also be sent as an e-mail
alert.
Runs an extended S.M.A.R.T test. This test requires a lot
more time to complete. However, it is a more thorough
and complete test when compared to the Quick Test.
Click on this button in order to create a scheduled S.M.A.R.T test. You will be able to schedule a test on a daily, weekly, and monthly basis.