Filter
Top Products
D-Link ShareCenter Pulse User Manual
Page 46
If you are behind a router, you will need to forward the FTP port from the router to the ShareCenter Pulse. Additional filtering and firewall settings may need to be modified
on your router to allow FTP Access to the ShareCenter Pulse from the Internet. Once the port has been forwarded on the router, users from the internet will access the FTP
server through the WAN IP address of the router.
If you are using a D-Link router, such as the WBR-2310 used in the example below, your port forwarding rule should be similar to the following:
Type a name for the ShareCenter Pulse FTP server rule.
Enter the IP address of the ShareCenter Pulse.
Enter the public FTP port. By default, the port is 21.
Enter the private FTP port. By default, the port is 21.
Set the traffic type to TCP.
ver using an FTP client will have to specify the non-standard port, and users who are using a browser
will have to specify the port in the URL (e.g. ftp://ftp.dns346.com:3000, where the FTP port is 3000).