Filter
Top Products
Setting frequency manually
☞
Activate “Manual tuning” in the radio menu. ➽ next page.
☞
Slowly turn the right rotary control to the right or left in order to change
the reception frequency step-by-step.
☞
Turn the control quickly by a few notches in order to start a fast search.
Press the control to stop the search.
☞
Press the control again to return to the automatic search.
✎
After 50 seconds, the radio switches back to automatic waveband tuning.
Presets
You can store 6 stations for each waveband on the preset buttons from 1 to 6.
☞
Tune to the desired waveband and station.
☞
Press the desired preset button until you hear a confirmation tone.
✎
The station selected is stored on the preset button.
✎
Stations cannot be stored manually in the FM AS and MW AS wavebands, these are
used exclusively for the Autostore function. ➽ “RADIO” menu.
Recalling stored stations
☞
Tune to the desired waveband.
☞
Press one of the preset buttons in order to recall the desired station.
The “RADIO” menu
In radio mode:
☞
Press the MENU button.
:
The “RADIO” menu is displayed.
The following functions are available:
RDS Memo (only in FM)
Searches for all currently available RDS stations and
stores them in alphabetic order in the station list.
☞
Activate this function to refresh the RDS Memo.
✎
Refreshing the RDS Memo may require up to 30 seconds.
Autostore
☞
Activate this function to automatically store up to 6 FM/AM stations with strong
signals on the FM AS or AM AS waveband.
Station list (only in FM)
☞
Select a station from the alphabetically sorted stations list (RDS Memo).
Preset list
☞
Select a previously stored station from the preset list for the selected waveband,
FM, MW, SW or LW.
30
RADIO
RADIO
RDS Memo
Autostore
Station list
Preset list