Filter
Top Products
Inserting a CD
1. Open the front panel.
2. Insert the CD into the drive (printed side up).
For audio CDs, playback starts automatically.
3. Close the front panel.
Removing a CD
1. Open the front panel.
2. Press the eject button.
3. Carefully remove the CD and close the front panel.
Switching on / off
☞
Press the POWER/VOLUME knob to switch the unit on or off.
Volume
A
When setting the volume, please make sure that traffic noises (horns, sirens, emergency
vehicles, etc.) are still audible.
☞
Turn the POWER/VOLUME knob to set the volume.
Setting the volume of the navigation messages
The volume of navigation messages can be modified whilst a message is playing by
turning the POWER/VOLUME knob.
☞
Press the { button to hear a navigation message and set the NAV volume.
Setting the volume of traffic announcements
The volume of traffic announcements can be set in the “INFORMATION” menu.
➽ page 25.
MUTE
☞
Press MUTE to activate/deactivate the mute function.
Notes:
The current navigation message can be played whilst the system is set to mute by
pressing the { button.
No traffic announcements or navigation messages are made when muting is activated.
Should you nevertheless wish to hear traffic announcements (with TA Scan activated)
and navigation information without the radio or CD playing, simply turn the volume
to zero on the unit. The announcements and information are then output at the
preset volume (“TA volume” or “NAV volume” in the “INFORMATION” menu).
22
OPERATION