Filter
Top Products
The “INFORMATION” menu
The “INFORMATION” menu allows you to configure
the type and amount of information the unit will
receive via the radio data system (RDS).
☞
Press the INFO button.
:
The “INFORMATION” menu is displayed.
The following options are available:
TMC Scan (Traffic Message Channel)
If you activate this function, the automatic search will only look for stations
transmitting TMC information and will ensure that you receive as much TMC data as
the unit can find.
TMC data are used in navigation mode for dynamic route planning and dynamic guidance.
An increasing number of RDS stations transmit these TMC data. See also “Behaviour of
TMC and TA” on the following page.
✎
TMC is not yet available in all countries.
✎
Stations with Pay TMC (subject to a fee) content are not supported and are ignored
during the search.
✎
If an MT 5011 TMC receiver is installed, “TMC Scan” setting in the Info menu has no
influence on navigation.
Only the TMC data received by the TMC receiver is used for dynamic route planning,
provided this is activated in the “Settings -> TMC Source” menu.
TA Scan (Traffic Announcements)
Activate this function if you wish to hear traffic announcements (TA). See also “Behaviour
of TMC and TA” on the following page.
✎
If the radio has not been set to a station with TA, you will hear a warning tone and
the radio will automatically search for a station transmitting traffic announcements.
News
Activate this function, if you wish to listen to news, e. g. even when a CD is playing or
when the unit is set to mute. Using the RDS-EON function, the unit can also receive the
news from other stations.
✎
News broadcasts may be interrupted by traffic announcements.
✎
The “News” function is not yet available in all countries.
Ann. level (Announcement level)
Set the volume difference for traffic announcements, news and alerts to the current
volume setting.
Guid. level (Guidance level)
Setting the guidance level controls the volume of announcements (in navigation
mode). Possible settings range from OFF to 8. If it is set to “OFF”, no audible
navigation information will be heard. Switching the unit off and then on again
removes this setting and the value is reset to “1”.
“INFORMATION” MENU
25
INFORMATION
TA Scan
News
Ann. Level: 2
TMC Scan
English