Filter
Top Products
41
GB
Other Recording Operations
z Tips
• Before you start recording, we recommend
you make a trial recording first.
• If the input level is not strong enough,
connect the headphone jack (minijack,
stereo) of other equipment to the
m (microphone) jack of the IC recorder and
adjust the volume level on the piece of
equipment connected to the IC recorder.
To record using the
synchronized recording function
The IC recorder pauses when no sound is
detected for more than 2 seconds. The IC
recorder starts recording again as a new file
when sound is detected.
When you select “Audio IN” from the
“Scene Select” menu, the “SYNC REC” is
already set to “ON.”
1 Select the (Recording) tab t
“SYNC REC” in the menu, and then
press
N/ENT.
2 Press v or V on the control button to
select “ON,” and then press
N/ENT.
“SYNC REC” is set to “OFF” when you
purchase the IC recorder.
3 Press x STOP to exit the menu mode.
4 Connect other equipment to the IC
recorder when the IC recorder is in the
stop mode.
Connect the audio output connector
(stereo mini-plug) of other equipment to
the m (microphone) jack of the IC
recorder using an audio connecting cable
(page 53).
“Select Input” appears in the display
window.
If “Select Input” is not displayed, set it in
the menu (page 79).
5 Press v or V on the control button to
select “Audio IN,” and then press
N/
ENT.
“Select Input” is set to “MIC IN” when
you purchase the IC recorder.
(The (FM radio)
tab is displayed only on
the ICD-UX512F.)