Filter
Top Products
118
GB
It takes a long time for the IC
recorder to start.
• If the IC recorder is required to process a large amount of data, it
may take longer for the IC recorder to start. This is not a
malfunction of the IC recorder. Wait until the start-up display
disappears.
The IC recorder does not
operate.
• You may have formatted the memory of the IC recorder using the
computer. Use the IC recorder formatting function to format the
memory (page 87).
The IC recorder does not
operate, even if you press
any button.
• The battery is weak (page 12).
• The power to the IC recorder is off. Slide the HOLD/POWER
switch in the direction of “POWER” for more than 1 second
(page 13).
• The HOLD function is activated. Slide the HOLD/POWER switch
in the center direction (page 9).
No sound comes from the
speaker.
• The volume is turned down completely (page 23).
• Headphones are plugged in (page 44).
• When you are listening to the FM radio, “Audio Output” is set to
“Headphones.” Set it to “Speaker” (page 72) (for ICD-UX512F
only).
Sound comes from the
speaker even when the
headphones are plugged in.
• If you plug in the headphones not securely during playback, the
sound may come from the speaker. Unplug the headphones, and
then insert them securely.
• When you are listening to the FM radio, “Audio Output” is set to
“Speaker.” Set it to “Headphones” (page 72) (for ICD-UX512F
only).
The operation indicator does
not light.
• “LED” is set to “OFF.” Display the menu and set “LED” to “ON”
(page 84).
The “Memory Full”
animation is displayed and
you cannot start recording.
• The memory is full. Erase some of the files (page 27) or erase all
the files after you store them on the other memory media or on
your computer.
Symptom Remedy