Filter
Top Products
105
GB
Additional Information
Additional Information
Using a USB AC Adaptor
You can charge the rechargeable battery by
connecting the IC recorder to an AC outlet
using a USB AC adaptor AC-U50AG/
AC-U501AD (not supplied). You can
charge the battery while you are using the
IC recorder, so that it is useful when you
want to record for a long time.
When you use the IC recorder for the first
time, or after you have not used the IC
recorder for a certain period of time, charge
the battery continuously until “ ” is
displayed.
It takes about 3 hours 30 minutes to fully
charge an exhausted battery.*
1 Connect a USB AC adaptor (not
supplied) to an AC outlet.
2 Slide the USB slide lever on the back of
the IC recorder and connect the USB
DIRECT connector to the USB AC
adaptor.
While the battery is charging, the battery
indicator is displayed in an animation.
Now you can use the IC recorder while
charging the battery.
* This is an approximation for the time it takes
to charge from no remaining battery power
to full battery power at room temperature. It
varies depending on the remaining power
and the condition of the battery. It also takes
more time if the temperature of the battery is
low, or if the battery is charged while you
are transferring data to the IC recorder.
P Notes
• While playing back files using the built-in
speaker, you cannot charge the battery.
• You cannot charge an LR03 (size AAA)
alkaline battery (not supplied).
USB AC adaptor (not supplied)
USB connector of the IC recorder
Battery indicator