74
GB
3 Click “Next.”
The license agreement dialog box is
displayed.
4 Read the agreement thoroughly,
and if you agree, check “I accept
this agreement” and click “Next.”
Tips
• When an older version of the printer driver
has been installed on your computer, the
message “Older version of the printer
driver has been found.” may appear on the
screen. Click “Yes,” and follow the
displayed instructions to restart your
computer. Then, perform the installation
procedures again. After the computer is
restarted, the older version of printer driver
will be deleted. If you install the new
version of printer driver, you can use the
new version of printer driver.
5 Click “Install.”
Installation starts.
6 When the “Sony DPP-F700 printer
driver has been successfully
installed.” dialog is displayed, click
“Finish.”
7 Press the 1 (on/standby) button to
turn on this unit.
8 Connect the USB connectors of this
unit and your computer with the
USB cable.
Notes
• Use a USB cable with a B-type plug (for
the USB B connector of this unit) shorter
than 3 meters.
9 On the mode selection screen of this
unit, press the B/bbuttons to select
[Print] and press the button.
10 Wait for a while, then check to see
that “Sony DPP-F700” has been
added to the “Printers” or “Printers
and Faxes.”
11 When the installation is complete,
remove the CD-ROM from your
computer and keep it for future use.
To continue the process and install the
PMB software, follow the procedures
from step 2 on page 76.
To USB
connector
To USB
connector
Windows PC