Filter
Top Products
103
GB
Additional information
Specifications
x Digital photo printer/frame
Printing method
Dye sublimation printing (yellow/
magenta/cyan 3 pass)
Print resolution
300 (H) × 300 (V) dpi
Image processing per dot
256 Tones (8 bits each for yellow/
magenta/cyan)
Printing range
1,800 dots × 1,200 dots
Printing size
101.6 × 152.4 mm (4 × 6 inch)
(maximum, borderless)
Printing speed (per sheet)*
1
*
2
Internal memory*
3
/Memory card*
4
/PC*
5
Approx. 45 sec.
Ink ribbon/Print paper
tRefer to supplied “About the Print
Packs.”
LCD screen
LCD panel:
18 cm/7 inches, TFT active matrix
Total number of dots:
1,152,000
(800 × 3(RGB) × 480) dots
Effective display area
Display aspect ratio:
16:10
LCD screen area:
17.3 cm/6.8 inches
Total number of dots:
1,105,920
(768 × 3 (RGB) × 480) dots
LCD backlight life
20,000 hours
(before brightness of the backlight is
reduced to half)
Input/Output connectors
USB connector (TypeB, Full-Speed USB)
Slots
“Memory Stick” slot (Standard/Duo)/
SD memory card slot/
xD-Picture Card slot/MMC card slot/
CompactFlash card slot
Compatible image file formats
JPEG: DCF 2.0 compatible, Exif 2.21
compatible, JFIF
*6
TIFF: Exif 2.21 compatible
BMP
*7
: 1, 4, 8, 16, 24, 32 bit Windows
format
(Some image file formats are not
compatible.)
Max. no. of pixels that can be displayed
and printed
8,000 (H) × 6,000 (V) dots
*8
File system
FAT12/16/32,
sector size of 2,048 bytes or smaller
Image file name
DCF format, 256 characters within 5th
hierarchy
Maximum number of files that can be
handled
4,999 files for a memory card
Internal memory capacity
*9
1GB
(Approx. 2,000 images
*10
can be saved.)
Power requirements
DC IN jack, DC 24V
Power consumption
100 W (maximum)
On standby mode: less than 1 W
* The definition of normal mode is the status in
which you can do a slideshow of images stored in
the internal memory with the default settings
without inserting a memory card.
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Continued