Filter
Top Products
8
Notes on handling discs
- Do not expose the disc to direct sunlight, high humidity or high
temperatures for extended periods of time.
- Discs should be returned to their cases after use.
- Do not apply paper or write anything on the disc surface.
- Handle the disc by its edge. Do not touch the playing surface (glossy
side).
- Fingerprints and dust should be carefully wiped off the playing surface
of the disc with a soft cloth.
Wipe in a straight motion from the centre to the outside of the disc.
- Never use chemicals such as record cleaning sprays, antistatic
sprays or fluids, benzene or thinner to clean discs.
BASIC OPERATION
Important note:
- This instruction manual explains the basic instruction of this
unit using the remote control.
- Some DVD or VCD discs have different functions that may not be
explained in this instruction manual. You may need extra
instructions. In this case, please follow the instructions displayed
on the TV screen or jacket or case of the disc.
-“ ” may appear on the TV screen during operation. This icon
means that the function is not available on the disc now.
Preparations
- Turn on the TV and select the video input for this unit.
Select the playback picture size according to the aspect ratio of the
TV. (See “Setting display” on Page 14.)
- Turn on the AV amplifier, etc. and select the audio input for this unit.
- Select the desired language for the on-screen menus. The following
languages can be selected. (See “Setting language” on Page 14.)
English (default), Spanish, French, German, Portuguese
In this instruction manual, the language in on-screen display is
English. If you change the language, please follow the selected
language in on-screen display.
Note:
- Do not touch the disc tray while it is moving.
- Never place anything except a disc on the disc tray. Foreign objects
can damage the unit.
- Do not apply excessive force to the disc tray.
- Only one disc must be placed on the disc tray at a time.
- To open or close the disc tray, be sure to use the OPEN/CLOSE (or
q on the main unit) button. Do not press the disc tray with your hand.
When operation buttons are pressed, that operation is displayed
on the TV screen for several seconds.
1. Press the z/ON button. “SANYO” logo appears on the TV screen.
“------” blinks, then “NO dISC” appears on the display.
2. Press the OPEN/CLOSE button. “OPEN” appears on the display and
the disc tray opens.
- When using the main unit, use the q button.
3. Place the disc with the label facing up on the disc tray (Fig. 10).
4. Press the OPEN/CLOSE button again. The disc tray closes.
Note:
Some discs may start play automatically.
Starting play
Press the a PLAY button.
- When using the main unit, use the a button.
Example:
Note:
If the disc is loaded with the label side downward (and it is a single sided
disc), or if a badly scratched disc is loaded, “No Play” appears. If this
occurs, load the disc correctly or replace the disc.
If a menu appears on the TV screen...
Press the 4, a, 5 or b button (or the number buttons),
then press the ENT button to select the desired menu.
Playback of the selected menu starts.
Note:
For more details, please refer to the jacket or case of the disc.
Stopping play
[DVD] [VCD]
- Press the n button once.
When you press the a PLAY button, play starts automatically from the
point where you stopped.
Note:
Some discs may not resume play.
- Press the n button twice. The unit stops completely and “StOP”
appears on the display.
When you press the a PLAY button, play starts from the beginning of
the disc.
[CD]
- Press the n button. The unit stops completely.
To turn off the power, press the z/ON button.
Continuing play from where you stopped watching (Last memory
play) [DVD]
1. During play, press the LAST MEMO button at the point from which you
want to resume play later. “LM StOP” appears on the display. Play
stops automatically.
2. Remove the disc or turn off the power.
3. Load the disc (and press the a PLAY button), or turn on the power.
“Last Memo Play?” screen appears.
4. Press the 4 button to select “Yes”.
5. Press the ENT button. Play resumes from the point where you
stopped. (If desired, press the LAST MEMO button again.)
Note:
- Points on up to 3 discs can be memorized.
- The Last Memory Play mode may not work correctly with some discs.
What is “PBC”?
“PBC” is an abbreviation for “Playback Control” that refers to control codes
prerecorded on Video CDs.
During playback of Video CD with PBC, “PbC” appears on the display.
To lock the disc tray (Main unit only)
You can lock the disc tray to prevent misuse by young children.
While the disc tray is opened, press the q button until “LOC” appears
on the display. (The disc tray closes.)
- The q (or OPEN/CLOSE on the remote control) button will not
function.
To release this mode, press the q button until “Un-LOC” appears on the
display.
Elapsed playing time
DVD
4
b
5
a
ENT
(The memory is released.)
Last Memo Play?
Yes
No
Clear