Filter
Top Products
7
CONNECTIONS
Before connections
- Do not connect the unit to a VCR directly. The playback picture will be
distorted because DVD discs are copy protected.
- When you connect the unit to your TV and other equipment, be sure
to turn off the power and disconnect all of the equipments from the wall
outlet until all the connections have been made.
- Please refer to the instruction manuals for the components that you
are connecting (TV, AV amplifier, etc.).
Connecting to a TV with the audio/video lead (Fig. 7)
Connecting to a TV with an EURO-AV lead
Please follow this step before turning on the power.
If your TV has an EURO-AV socket, connect the unit as shown in Fig. 8.
(Do not connect the video lead to the VIDEO OUT socket.) You can enjoy
clearer picture playback.
As an alternative to using the TV’s speakers, the sound can also be
played back through a HiFi system or an amplifier.
Connecting to a HiFi system with analog two-channel stereo sound
Connect an audio lead (not supplied) to the AUDIO OUT sockets of the unit
and to the appropriate sockets of the HiFi system.
- The AUDIO OUT sockets can also be used for connection to an AV
system with Dolby Pro Logic decoder.
Note:
To enjoy Dolby Pro Logic sound, select “Dolby Digital: LPCM” in “Setting
digital out”. (See Page 15.)
Connecting to a digital multi-channel AV amplifier (Fig. 9)
The digital multi-channel sound of a DVD can best be decoded and played
with a multi-channel AV amplifier (Dolby Digital decoder or MPEG-2
decoder).
The AV amplifier has to be able to process the DTS audio signal in order
to play a DVD with DTS. If it cannot, then you will not be able to hear the
DVD.
Note:
Select “Setting digital out” setting as follows. (See Page 15.)
- To enjoy Dolby Digital sound, select “Dolby Digital: BitStream”.
- To enjoy DTS sound, select “DTS: On”.
- To enjoy MPEG-2 sound, select “MPEG: BitStream”.
- To enjoy 2 channel digital stereo sound, select “Dolby Digital: LPCM”,
“DTS: Off”, “MPEG: LPCM”.
Notes on the digital socket connection
Before connecting, remove the protective cap from the DIGITAL OUT
socket. Replace the cap if there is no device connected to this socket.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby
Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems,
Inc.
PLAYABLE DISCS
The following types of discs can be played on this unit.
Region number
Region number (Regional restriction code) is built-in to the unit and DVD
discs.
There is a region number on the rear of the unit.
The same region number or region number “ALL” of DVD discs can be
used on this unit.
DVD disc
There are the marks on some DVD disc packages.
Example:
Multiple languages Multi-aspect
Multi-language subtitles Region number
Multi-angle Closed caption
DVD discs are divided into titles, and the titles are sub-divided into
chapters.
Video CD/Audio CD disc
Video CD/Audio CD discs are divided into tracks.
Note:
- Only the above types of discs can be played on this unit.
DVD-ROM, CD-ROM, SVCD, CVD, etc. cannot be played.
- This unit can play back the Video CD (VCD).
- This unit can play back the DVD-R that has recorded movie data.
However, some DVD-Rs cannot be played back depending on the
recording conditions.
- The DVD-R that has no movie data cannot be played back.
- This unit is to be used exclusively with the PAL (or NTSC) colour
system discs. SECAM system discs cannot be used with this unit.
- For DVD discs: The video output signal format can be selected (“PAL
60” or “NTSC”) when playing back the NTSC discs.
- For MP3/WMA CD, please see Page 12.
- For Picture/JPEG CD, please see Page 13.
Disc type and logo mark
DVD Video
Audio CD
LB16:9
3
2
3
2
Title 1
Chapter 1 Chapter 2
Title 2
Chapter 1 Chapter 2 Chapter 3
Track 1 Track 2 Track 3 Track 4 Track 5