Sanyo RB-SL25 Portable DVD Player User Manual


 
10
Picture zoom (Pin point zoom) [DVD] (Fig. 12)
1. Press the ZOOM button during normal, slow or still play. The pin point
guide screen appears.
- If you quit the screen, press the ZOOM button.
2. Press the 4, a, 5 or b button, then the ENT, or press the number
button to select the zoom point.
The screen is magnified. “ 1” appears briefly on the screen.
If necessary, press the 4, a, 5 or b button repeatedly to move the
screen.
3. Press the ZOOM button again. The screen is magnified more than
1”. “ 2” appears briefly.
4. Press the ZOOM button to return to the original screen.
Note:
Picture zoom may not work on some discs.
Viewing from a desired camera angle (Multi-Angle)
[DVD] (Fig. 13)
Some DVD discs may contain scenes which have been shot simultaneously
from a number of different camera angles. The jacket or case of discs that
are recorded with angles will be marked.
Example:
Note: The recorded angles differ depending on the disc used.
1. Play the disc that is recorded with angles.
2. Press the ANGLE button repeatedly until the desired angle appears.
Example:
Angle replay [DVD]
During Multi-angle play screen, press the ANGLE REPLAY button. The
unit skips back to last approximately 10 seconds, changes it to the next
camera angle and plays it, and continues play. (If desired, press the button
again.)
Repeat play
Press the REPEAT button during play (or programmed play) of the title (or
track) you want to repeat. Each time the button is pressed, the repeat
mode changes as follows.
TV screen Display Operation
[DVD]
Chapter REP 1 Repeat of chapter being played
Title ALL REP Repeat of title being played
Off Repeat off mode
[VCD] [CD]
1 REP 1 Repeat of track being played
All ALL REP Repeat all tracks
Off Repeat off mode
During programmed play [VCD] [CD]
Program 1 REP 1 Repeat of track being played
Program All ALL REP Repeat all programmed tracks
Off Repeat off mode
123
456
789
3
3/5
Designated range repeat play (A-B Repeat) (Fig. 14)
1. Press the A-B REPEAT button during play at the beginning of the
section you want to repeat (Point A). “ A-” appears on the screen.
“A-” appears on the display.
2. Press the A-B REPEAT button again at the end of the section (Point
B). “A-B” remains lit on the display.
The section between points A and B is played repeatedly.
3. To return to normal play, press the A-B REPEAT button again.
Note:
Repeat play or A-B repeat play mode may not work correctly with some
discs.
Notes on using Video CD with PBC
To use the repeat play or A-B repeat play mode, select PBC off play mode
as follows.
In the stop mode, press the number button(s) to select the track number
then press the a PLAY button.
Random play [CD]
1. Press the PROGRAM/RANDOM button once in the stop mode.
“Random” appears on the screen.
2. Press the a PLAY button to begin random play. “RND” appears on the
display. The unit will automatically select tracks at random.
Note:
The A-B REPEAT and SEARCH MODE buttons do not work during
random play.
Programmed play [VCD] [CD]
Up to 20 selections can be programmed.
Programming procedure
1. Press the PROGRAM/RANDOM button once (VCD) or twice (CD) in
the stop mode. The programme mode screen appears.
2. Press the number buttons to select the track number.
Example:
To select track No.3, press 0, then 3.
To select track No.10, press 1, then 0.
To select track No.24, press 2, then 4.
- If you make a mistake, press the CLEAR button.
3. Press the 5 button to move the highlighted box down.
Example:
4. Repeat step 2 - 3 above to select another track.
5. Press the a PLAY button to start play. “PGM” appears on the display.
When all programmed selections have played, the unit stops
automatically.
- The programme contents are retained in memory.
Note:
To play the programme again, press the PROGRAM/RANDOM button
once (VCD) or twice (CD) to call up the programme mode screen, then
press the a PLAY button.
Program Mode
All Clear
1 03 6 -- 11 -- 16 --
2 -- 7 -- 12 -- 17 --
3 -- 8 -- 13 -- 18 --
4 -- 9 -- 14 -- 19 --
5 -- 10 -- 15 -- 20 --