Filter
Top Products
CONTROLLING YOUR TV WITH THE VCR'S REMOTE - 64 -
Toshiba 7
Gold Star 2 8
Panasonic 2 9
RCA 0
Panasonic 1 CH/SET (up arrow)
Mitsubishi CH/SET (down arrow)
JVC 100/ENT
Sharp 1 MEMORY
Sharp2 SELECT
CONTROLLING THE TV
Once programmed, the VCR's remote control is ready to control the TV.
NOTE: Be aware that not all of your TV's functions may work even though the
remote control is correctly programmed.
1 Select the TV function mode
First press TV button to change to the TV function mode, then press the
button of the TV function that you want.
For example;
Press TV button and the CH/SET ( ), and the TV station will change to
the next higher station.
2 Return to the VCR function mode
Press VCR button to operate your VCR with the remote again.
REMOTE CONTROL OF THE CABLE CONVERTER
If you have a cable converter, you will probably want to program your
VCR's remote control so you can easily change channels. The process is
the same as for programming the remote to operate your TV. For
additional details, see the previous page.
PROGRAMMING THE REMOTE CONTROL OF THE CABLE
CONVERTER
1 Program the remote control
Hold down the CATV button and press the number of your brand of cable
box (shown in the chart).
NOTE: If that button combination does not work, or if your brand is not on the
chart, just go through all the button combinations until you find the one that works
best.
Cable Converters Press CATV and This
Number