Filter
Top Products
TIMER RECORDING - 57 -
1) Repeat steps [1] to [2] previous page.
2) Select a program number you want to check using CH/SET or
button. The details of selected program appears on the TV screen.
You may cancel the entire program by pressing ADD/DELETE button.
HINTS FOR TIMER RECORDING
• If there is a power failure or the VCR is unplugged for more than 30
seconds, the clock setting and all timer settings are lost. When you select
the clock manually, the clock setting may be lost.
• If the tape runs out before the end time, the VCR will switch to the Stop
mode immediately, eject the tape and the VCR power will be turned off.
The "
" indicator will flash.
• If a tape is not inserted or the erase-protection tab is removed, the "
"
indicator flashes and automatic timer recording cannot occur. Insert a tape
that allows recording.
• The TV that is connected to your VCR may be turned ON or OFF when
the VCR is in the timer-record mode.
• When you record a cable channel program with cable converter box, first
set the VCR's channel to 3 or 4 whichever is the output channel of your
cable converter box. Then set your converter box to the channel you want
to record and leave on while you are recording with power on.
AUTO RETURN
If you select auto return to [AUTO] from the menu, when all the timer
recordings are completed, the VCR will return to the beginning of the
recorded program(s).
NOTE: If there are any remaining programs including Daily & Weekly, this
function does not be done.
1 Select the main menu
Press MENU button.
2 Select "VCR SET UP"
Press CH/SET
or button repeatedly to point to "VCR SET UP".
Then, press SELECT button.
3 Select "AUTO RETURN"
Press CH/SET or button repeatedly to point to "AUTO RETURN".
VCR SET UP