Filter
Top Products
CONTROLLING YOUR TV WITH THE VCR'S REMOTE - 63 -
to program the remote for your TV.
Every TV that comes with a remote control is set up to detect certain
infrared signals. You need to program the VCR's remote control to send
signals that your TV will recognize and respond to. Here's what to do:
Compatibility
• The remote control is designed to be operated with many televisions and
cable converters, but will not work with every one made. If your TV or
cable box does not respond the way it should when you program if as
explained follows, this remote may be incapable of operating it.
• Once you have programmed the remote, you won't have to do it again
until you change the batteries.
REMOTE CONTROL OF THE TV
PROGRAMMING THE REMOTE CONTROL OF THE TV
1 Turn on the TV
Turn on the TV (any channel is okay).
2 Program the remote control
Aim the VCR's remote control at your TV set. Hold down the TV button
(not the VCR/TV button) while you press the number corresponding to
your brand of television as shown in the chart.
For example; If you have an RCA television, press TV and 0 at the same
time. If this button combination sends a signal that matches with your TV,
the channel will change on the TV, and you'll know the remote is set to
control the television.
NOTES:
• If that button combination does not change the TV channel, go through the
whole list of button combinations one by one until you find one that does change
your TV channel.
• Also, if your brand of TV is not listed in the chart, try all the number buttons.
One of them may work for you.
• If the TV channel still doesn't change after going through all the button
combinations listed, it is likely that you will not be able to program this remote
control for your TV.
TV Brands Press TV and This
Number
Hitachi 1
Zenith 2
Sony 3
Magnavox 4
Sanyo 5
Gold Star 1 6