Filter
Top Products
PLAYBACK - 39 -
automatically switch to the Stop mode.
VERTICAL HOLD CONTROL
When the picture begins to vibrate vertically, stabilize the picture by
pressing CHANNEL (or CH/SET) or button in the Still mode.
NOTES:
• When the picture is distorted or rolling vertically, adjust the vertical hold control
on your TV.
• Some latest TV's do not have a user adjustable vertical hold control.
TRACKING ADJUSTMENT
• Tracking adjustment will be set automatically (Digital TRacking function)
when you start playback. "DTR" appears on the display.
• When playing pre-recorded tapes or tapes recorded on units other than
your own, noise lines (black and white streaks) may appear on the
playback picture. If this occurs, you can adjust the tracking control
manually by pressing CHANNEL or button on the VCR until the
streaks disappear. To return to the DTR function, stop the tape once and
start playback again.
• You can reduce the noise lines by pressing CHANNEL or button in
the slow mode, too. Slow tracking adjustment will not be set automatically.
Note: In Still mode, press SLOW button on the remote control and press
CHANNEL or button until the streaks disappear. To return to Still mode,
press PAUSE button again.
SLOW MOTION
Press SLOW button on the remote control to reduce the playback speed.
The VCR mutes the sound during slow motion. You can control the speed
by pressing F.FWD button (faster) or REW button (slower).
Press PLAY button to return to normal playback.
NOTE: If it is left in the Still mode for more than five minutes, the VCR will
automatically switch to the Stop mode.
AUTO REWIND
When the end of a tape is reached during recording, playback, or fast-
forward, the tape will automatically rewind to the beginning. After that, the
VCR will eject the tape and turn itself to off.
NOTES:
• The tape will not auto-rewind during timer recording or Instant Recording Timer.