Filter
Top Products
CONTROLLING YOUR TV WITH THE VCR'S REMOTE - 62 -
1) Insert a pre-recorded video cassette into the source (playing) VCR.
2) Insert a blank video cassette, or one you want to record over, into the
editing (recording) VCR cassette compartment.
3) Press TAPE SPEED button on the remote control to select the desired
recording speed (SLP, LP or SP) on the editing (recording) VCR.
4) Select AUX position on the editing (recording) VCR. See page 11,
under "Input Select".
5) Press REC button on the editing (recording) VCR.
6) Begin playback of the tape in the source (playing) VCR.
NOTES:
• For best results during dubbing, use the VCR's front panel controls whenever
possible. The remote control might affect the playback VCR's operation.
• Always use video-quality shielded cables with RCA-type connectors. Standard
audio cables are not recommended.
• You can use a video disc player, satellite receiver, or other audio/video
component with A/V outputs in place of the playback VCR.
TO MONITOR THE RECORDING
1) Turn on the TV, and set it to the same output channel as the editing
VCR channel 3 or 4.
2) Press VCR/TV button on the remote control so that "VCR" appears on
the display.
CONTROLLING YOUR TV WITH THE VCR'S REMOTE
This Hitachi remote control can be used with your TV as well as the VCR,
as long as your TV comes with a remote control. This feature comes in
handy--you won't have to juggle two remotes.
The remote control is compatible with the fifteen makers of TVs listed
below--but don't be alarmed if yours is not on our list. You may still be able