Filter
Top Products
RECORDING - 50 -
5 Select the channel on the TV
Set the TV to the channel you want to watch.
TO MONITOR THE PROGRESS OF YOUR RECORDING
1 Select the VCR mode
Press VCR/TV button on the remote control to select TV so that the "VCR"
appears on the display
2 Select channel 3 or 4 on the TV
Turn on the TV and set the TV channel to the same video output channel
as located on the back of the VCR. (CH3 or 4)
IRT (Instant Recording Timer)
This function enables you to set a recording length simply by pressing the
REC/IRT button on the VCR.
NOTE: This function cannot be done by the remote control.
Make sure...
• VCR Power must be turned on.
• Turn on the TV and set the TV channel to the same video output channel
as located on the back of the VCR. (CH3 or 4)
• Press VCR/TV button on the remote control so that "VCR" appears on
the display.
• Insert a cassette tape with its erase prevention tab in place. (If
necessary, rewind or fast forward the tape to the point at which you want
to begin recording.)
PUSH(ES) DISPLAY RECORDED
LENGTH
1 push
(normal recording)
2 pushes 0:30 30 minutes
3 pushes 1:00 60 minutes
17 pushes 8:00 480 minutes
18 pushes
(normal recording)
1 Select the channel to be recorded
Press number buttons on the remote control or the CHANNEL (or