Filter
Top Products
MTS (Multi-Channel Television Sound) SYSTEM - 17 -
Connect your VCR to your stereo source using the following diagram.
CHECKING THE SELECTED MTS MODE
When you receive a signal from a tape or VCR tuner channel you are
watching, the status shown below will appear when you press the
SELECT button on the remote control.
SAP
A
Second Audio Program which means your
program is received in a second language.
HIFI High Fidelity which produces a clear sound from two
sources.
1] When a program broadcast in stereo can be received, STEREO
appears on the TV screen.
2] When a program broadcast in second audio can be received, SAP
appears on the TV screen.
3] When a program broadcast both in stereo and second audio can be
received. STEREO and SAP appear on the TV screen.
NOTE: Although a program may be broadcast in both stereo and second audio,
you cannot record in both stereo and second audio at the same time.
4] While VCR is set in HIFI stereo mode. HIFI appears on the TV screen.
While VCR is set in monaural (MONO) mode, HIFI disappears from the TV
screen.
NOTE: If you play non-HIFI tapes while the VCR is set in HIFI, HIFI will
disappear from the TV screen and the VCR play automatically in monaural.