Filter
Top Products
PREPARATION FOR USE - 13 -
TV position: to watch TV or to view on program while recording another.
25. COUNTER MEMORY button- Press to set counter memory on and
off.
26. ADD/DELETE button- Press to add or delete channel numbers during
channel preset. Press to cancel a setting of timer program. Press to
correct digits when setting program (for example: setting clock or timer
program).
COUNTER RESET button- Press to reset counter to 0:00:00.
27. TAPE SPEED button- Press to set desired recording speed :
SP/LP/SLP.
28. Power cord- Connect to a standard AC outlet (120V/60Hz).
29. AUDIO OUT jacks- Connect to the audio input jacks of your audio
equipment or another VCR.
30. AUDIO IN jacks- Connect to an audio output jacks of your audio
equipment or another VCR.
31. ANT. IN terminal- Connect to an antenna or CATV.
32. VIDEO OUT jack- Connect to a video input jack of your video camera
or another VCR.
33. VIDEO IN jack- Connect to a video output jack of your video camera
or another VCR.
34. CH3/CH4 selector switch- Use to select a video output channel (3 or
4) for playback from the VCR.
35. ANT. OUT terminal- Connect to an antenna input terminal of your TV.
PREPARATION FOR USE
CABLE CONNECTIONS
For some of the most common types of connections, see the following
drawings. Use only one connection. For any further complex connections,
please contact your local dealer or other qualified persons. (You may need
additional accessories which are not supplied).
1 Disconnect the antenna or cable from your TV.
2 Connect the antenna or cable to the ANT.IN jack of your VCR.