Filter
Top Products
58
PRESET LIST
#
1-15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Name
"## Empty"/"
## User Preset"
Factory Presets
Neutral
BassMgr ??Hz
BassMgr 80Hz
BassMgr 95Hz
BassMgr 110Hz
BassMgr 115Hz
BassMgr 120Hz
Cinema Flat
Cine X-curve
Cine X-curve2
Cinema X+50Hz
Cinema X+80Hz
CinemX+120Hz
Cinema 80Hz
Cinema 120Hz
OB Van 120Hz
Neutral
X-curve #1
X-curve #2
LFE Gain
Typical Applications
All parameters neutral - a good starting point
Music, video and post for domestic (Not Cinema) use - Stereo, 5.1, 5.3 and 6.1
Music, video and post for domestic (Not Cinema) use - Stereo, 5.1, 5.3 and 6.1
Music, video and post for domestic (Not Cinema) use - Stereo, 5.1, 5.3 and 6.1
Music, video and post for domestic (Not Cinema) use - Stereo, 5.1, 5.3 and 6.1
Music, video and post for domestic (Not Cinema) use - Stereo, 5.1, 5.3 and 6.1
Music, video and post for domestic (Not Cinema) use - Stereo, 5.1, 5.3 and 6.1
Mixing for Cinema without compensation for X-curve. 5.1
Mixing for Cinema in a small room - compensates for X-curve. 5.1
Mixing for Cinema in a small room - compensates for modified X-curve. 5.1
Mixing for Cinema with small room X-curve compensation and bass Management.
Mixing for Cinema with small room X-curve compensation and bass Management
Mixing for Cinema with small room X-curve compensation and bass Management
Mixing for Cinema with Bass management but without compensation for X-curve
Mixing for Cinema with Bass management but without compensation for X-curve
OB vans and very small rooms where rear-channels are close to sweetspot
All parameters neutral - a good starting point
ANSI / SMPTE222M (1.5dB roll off per oct. from 2kHz)) Please refer to page 25
ANSI / SMPTE222M Mod. (3dB roll off per oct. from 4kHz) Please refer to page 25
Please note that the LFE channel should be mixed with +10dB headroom.
If you are not able to boost your LFE monitor output, you should add +10dB gain on
your AIR-Base.
Most format encoders / decoders take the LFE boost into account, meaning that you
should leave the AIR-Base LFE gain at 0dB
when playing back a DTS or DOLBY encoded material on your AIR system
Preset Level (dB) Bass M. X-curve 1 X.Curve #2
L C R Ls Rs SUB LFE X-over
000000 0dB gain Off Off Off
000000 0dB gain 50Hz Off Off
000000 0dB gain 80Hz Off Off
000000 0dB gain 95Hz Off Off
000000 0dB gain 110Hz Off Off
000000 0dB gain 115Hz Off Off
000000 0dB gain 120Hz Off Off
0 0 0 -3 -3 0 0dB gain Off Off Off
0 0 0 -3 -3 0 0dB gain Off Yes Off
0 0 0 -3 -3 0 0dB gain Off Off Yes
0 0 0 -3 -3 0 0dB gain 80Hz Yes Off
0 0 0 -3 -3 0 0dB gain 80Hz Yes Off
0 0 0 -3 -3 0 0dB gain 120Hz Yes Off
0 0 0 -3 -3 0 0dB gain 80Hz Off Off
0 0 0 -3 -3 0 0dB gain 120Hz Off Off
0 0 0 -2 -2 0 0dB gain 120Hz Off Off
000000 0dB gain Off Off Off
Preset one to fifteen are "empty" until you choose to store something after which it says "User Preset"