Filter
Top Products
50
AIR SOFT
Calibrate - AIR-Base
Calibrated Level
Level calibration of the selected monitor.
Relative Level
Preset volume for the selected monitor relative to the
calibrated and global volume.
Use Parametric EQ
This will be marked if the Parametric EQ is activated via
the AIR PC-IP. Bass and Treble settings will be disabled.
Bass/Treble
Range: -6dB to +6dB
Bass and Treble adjustment for the selected monitor.
These handles are not available when the Parametric EQ
is activated via AIR PC-IP.
Mute
Press to mute the selected monitor.
Solo
Press to solo the selected monitor.
Pink Noise
Press to generate Pink Noise in the selected
monitor.
Polarity
Range: 0 or 180 deg.
Mark to activate.
Calibrated Level
Level calibration of the selected monitor.
Relative Level
Preset volume for the selected monitor relative to the
calibrated and global volume.
LFE Gain
Range: 0 to 14dB
With this parameter you can boost the gain of the LFE
channel.
LFE Low Pass Filter
Mark to activate.
Mute
Press to mute the selected Sub.
Solo
Press to solo the selected Sub.
Pink Noise
Press to generate Pink Noise in the selected
Sub.
Chained monitors
If several monitors are chained on the same task (e.g.
LSur-LSChain) a dropdown menu will be present as
illustrated below.
To calibrate a chained monitor simply select from the list.
Chained monitors will also be indicated in the Main
screen.
This symbol indicates that there are two monitors
chained on this specific position.
Mute
Solo Pink Noise
Via this Calibrate screen, parameters and settings for the
Subwoofers are controlled.
The screen is accessed via the Main Screen by
holding the cursor above the desired Sub and
selecting the hammer icon.
Phase
Range: 0-180°
To time-compensate if the Sub is not placed according to
the ITU 775 recommendations. There are individual Phase
settings for each of the Bass Management Cross-over
frequencies. Once set, these are stored as Global settings.