Filter
Top Products
54 DXZ945MP
English
Main Item Sub-item
SOUND CENTER-SP / SRD-SP / SUB-WOOFER
• Setting the speaker ON/OFF (cf. page 54)
FRONT HPF / CENTER HPF / SRD HPF / SUB-W LPF
• Adjusting the speaker filter frequency (cf. Page 54)
SP GAIN
• Adjusting the speaker output level (cf. page 41)
DELAY CENTER-SP / SRD-SP
• Adjusting the speaker delay time (cf. page 55)
DOLBY D D-RANGE
• Adjusting the dynamic range (cf. page 55)
PL II CONT PANORAMA / DIMENSION / CTR WIDTH
• Setting the music mode in detail (cf. page 42)
● Setting items
Adjusting the filter
frequencies of speakers
(FRONT HPF/CENTER HPF/
SRD HPF/SUB-W LPF)
This function allows you to adjust the filter
frequency matched to the speakers you are
using.
•A speaker that was turned off in the section
“Setting speakers on or off (CENTER-SP/
SRD-SP/SUB-WOOFER)” is not displayed.
• The factory default setting for “FRONT HPF”
or “SRD HPF” is “THROUGH” (no filter), and
for “CENTER HPF” or “SUB-W LPF” is
“120Hz”.
■ Filter adjustment
FRONT HPF/CENTER HPF/SRD HPF
(high-pass filter adjustment)
This filter cuts bass sound from the front center
and surround speakers.
THROUGH ➜ 50Hz ➜ 80Hz ➜ 120Hz
Set the filter matched to the speaker when
small-diameter speakers are used.
THROUGH
Set this when using speakers that can
generate bass. THROUGH cannot be set at
CENTER HPF.
SUB-W LPF (sub-woofer low-pass filter
adjustment)
This filter cuts treble sound from the sub-woofer.
50Hz ➜ 80Hz ➜ 120Hz
Set the filter frequency to match the sub-woofer.
1. Press the [A] button to set to the adjust
mode.
5.1ch Surround Decoder Operations
Setting speakers ON/OFF
(CENTER-SP/SRD-SP/SUB-
WOOFER)
Set the center speaker (CENTER-SP), surround
speaker (SRD-SP) and sub-woofer (SUB-
WOOFER) ON/OFF.
Be sure to set this setting to “OFF” when there
is no center speaker, surround speaker or sub-
woofer.
• The factory default setting is “ON”.
1. Press the [A] button to set to the adjust
mode.
2. Touch on the setting item display to
select “CENTER-SP” under “SOUND”,
“SRD-SP” under “SOUND”, and “SUB-
WOOFER” under “SOUND”.
ADJUST MODE
CENTER-SP
SOUND
ON
3. Either touch on the right of the
display, or turn the [ROTARY] knob to select
“ON” or “OFF”.
∗ In the case of “SUB-WOOFER”, select
one of “ON+”, “ON-” or “OFF”.
Normally, select “ON+”. However, when
“ON-” is set, an effect in the low range can
be strongly felt.
4. Press the [A] button to return to the original
mode.