Filter
Top Products
36 DXZ945MP
English
Operations Common to Each Mode
Setting the clock (CLOCK)
When the power is turned OFF with the clock
displayed, the clock remains displayed even if
this unit is turned off as long as the car engine is
running (ACC is ON).
The clock is displayed in 12-hour format.
1. Press the [A] button.
2. Touch on the setting item display to
select “CLOCK” under “DISPLAY”.
ADJUST MODE
CLOCK EDIT
DISPLAY
3. Touch EDIT.
The time (“e.g. “PM 2: 20”) currently set on
this unit is displayed, and the mode changes
to the time setting mode.
ADJUST MODE
10am 05
CLOCK
SET
S
RTN
∗ If you operate another button while you
are setting the time, the time is not
adjusted.
4. Touch on the center of the display to
set hours.
5. Either touch on the right of the
display, or turn the [ROTARY] knob to set
minutes.
6. Touch SET.
∗ You will hear a long beep, and the time is
set.
Notes:
• The clock cannot be adjusted when the power is
OFF.
• When the battery has been removed for
maintenance or for repair, set the time again.
7. Press the [A] button to return to the original
mode.
Setting the screen saver
(SCREEN SVR)
This function allows you display a screen saver
when you have not operated this unit for about
30 seconds.
• The factory default setting is “ON”.
1. Press the [A] button to set to the adjust
mode.
2. Touch on the setting item display to
select “SCREEN SVR” under “DISPLAY”.
ADJUST MODE
SCREEN SVR ON
DISPLAY
3. Either touch on the right of the
display, or turn the [ROTARY] knob to select
“ON” or “OFF”.
4. Press the [A] button to return to the original
mode.
■ To switch the screen saver display
Touch PREV or NEXT while the screen saver is
displayed.
Each touch of these buttons switches the
screen saver display.
● Screen savers
Screen saver pattern 1
Screen saver pattern 2
Screen saver pattern 3
Spectrum analyzer pattern 1