Filter
Top Products
DXZ945MP 49
English
TV Operations
MODE
Touching this displays sub-functions. Touching
and holding this for 1 second or longer displays
the preset memory list.
P-SCAN: This is displayed during a preset
scan. Touching this ends the preset scan.
A-STORE: This is displayed during an auto-
store. Touching this ends the auto-store.
BAND
Touching this switches the reception band.
Touching and holding this for 1 second or longer
toggles between the manual tuning mode and
the seek tuning mode.
a d (only in the simple operation display)
Touching these buttons enables seek tuning or
step tuning (in the manual tuning mode).
Touch and holding these buttons enables quick
tuning (in manual tuning mode).
■ Preset memory list display
This is displayed by touching and holding
MODE for 1 second or longer in the main
display.
32ch
3ch
004
001
80ch
005
105ch
12ch5ch
006
003002
TITLE LIST
RTN
:
Tuning in progress
RTN :
Touching this returns the display to the main
display.
Selecting the TV mode
1. Press the [ROTARY] knob to select the TV
mode.
Each press of the [ROTARY] knob switches
the mode as follows:
∗ The mode of equipment that is not
connected is not displayed.
Switching the reception band
1. Touch BAND to switch the reception band.
Each touch of BAND switches the reception
band.
TV1 ➜ TV2 ➜ TV1...
Seek tuning
Seek tuning is a function for automatically
tuning stations with good reception.
1. Touch and hold BAND for 1 second or longer
while MANU is displayed.
Automatic tuning is possible when MANU
disappears.
2. Touch on the channel display.
SEEK UP/SEEK DOWN is displayed, and
tuning starts. Tuning automatically stops at
stations with good reception.
■ To cancel tuning
1. Touch on the channel display again.
Manual tuning
There are 2 ways available: quick tuning and
step tuning.
When you are in the step tuning mode, the
frequency changes 1 step at a time. In the quick
tuning mode, you can quickly tune the desired
frequency.
1. Touch and hold BAND for 1 second or longer
while MANU is not displayed.
Manual tuning is possible when MANU is
displayed.
2. Operate the channel display to tune to a
channel on which there is a broadcast.
There are 2 manual tuning methods: step
tuning and quick tuning.
∗ Step tuning is a function for switching the
channel 1 step at a time.
Touch on the frequency display.
∗ Quick tuning is a function for switching the
channel continuously.
Touch at the channel display.
Tuning stops when you take your finger
away from the panel.
Station name
Preset No.