Filter
Top Products
42 DXZ945MP
English
4. Touch on the adjustment item display
to select the desired item.
Each touch of switches the
adjustment item as follows:
Adjustment items
*
1
“CTR GAIN” is displayed only when “SP-
SETTING” is set to “CTR+SW” and
“CENTER-SP” is set to “ON”.
*
2
“SUB-W GAIN” is displayed only when
“SUB-WOOFER” is set to “ON”.
5. Either touch on the right of the
display, or turn the [ROTARY] knob to adjust
the output level.
The output level can be adjusted within the
range -10 dB to +10 dB
6. Repeat steps 4 and 5 to adjust each item.
7. Press the [A] button to return to the original
mode.
Adjusting the delay time of
the rear speaker (PL II
DELAY)
The timing that sound arrives at the listening
position differs according to the mounting
position of the rear speakers and the size of
your car. If you adjust the delay time of the rear
speakers, you can adjust so that sound from the
rear speakers can be heard at the same timing
as output from the front speakers.
• This item can be set only when the Dolby Pro
Logic II mode is set to “MUSIC” or “MATRIX”.
• The factory default setting is “0ms”.
1. Press the [A] button to set to the adjust
mode.
2. Touch on the setting item display to
select “SRD-SP” under “PL II DELAY”.
ADJUST MODE
SRD-SP
PLII DELAY
0ms
Operations Common to Each Mode
3. Either touch on the right of the
display, or turn the [ROTARY] knob to adjust
the delay time.
∗ “SRD-SP” can be adjusted within the
range 0 ms to 15 ms.
4. Press the [A] button to return to the original
mode.
Setting the music mode in
detail (PL II CONT)
This function allows you to set the music mode
in more detail when the Dolby Pro Logic II mode
is set to “MUSIC”.
• This item can be set only when the Dolby Pro
Logic II mode is set to “MUSIC”.
• The factory default setting for PANORAMA is
“NO”, for DIMENSION is “3” and for CTR
WIDTH is “3”.
Adjustment items
PANORAMA (panorama control setting)
This widens the soundfield image at the front up
to the rear speakers. Set this item to “YES” if
you feel that there is no surround effect.
DIMENSION (dimension setting)
Shifts the soundfield image to the front or the
rear. When the soundfield image inclines to
either the front or the rear, this inclination can be
compensated.
Adjustment value 3 is the center position.
Adjustment values 2 to 0 shift the soundfield
image to the rear, while adjustment values 4 to
6 shift the soundfield image to the front.
CTR WIDTH (center width setting)*
1
Adjusts the fixed position of the center channel
between the center speaker and L/R front
speakers.
When the center sound is divided equally to the
left and right, the entire soundfield image
increases to produce a naturally expanding
feeling.
Adjustment value 0 plays back all center sounds
on the center speaker.
Adjustment value 7 divides the center sound
equally between the L/R front speakers.
*
1
“CTR WIDTH” is displayed only when “SP-
SETTING” is set to “CTR+SW” and
“CENTER-SP” is set to “ON”.
1. Press the [A] button to set to the adjust
mode.
FRONT
L
GAIN
(front left speaker)
CTR GAIN
(center speaker) *
1
FRONT
R
GAIN
(front right speaker)
SRD
R
GAIN
(rear right speaker)
SRD
L
GAIN
(rear left speaker)
SUB-W GAIN
(sub-woofer)
*
2