Filter
Top Products
DXZ945MP 25
English
Notes:
• When auto store is performed, stations stored to
memory so far are cleared.
• When there are fewer than 6 stations with good
reception, low frequencies are automatically
returned to, and auto store is performed again. If
there are fewer than 6 stations even after auto
store is performed twice, stations stored so far
remain in memory.
Preset scan
Preset scan is a function for receiving stations in
the order that they are currently stored to preset
No. so that broadcasts can be checked.
1. Touch MODE.
2. Touch P-SCAN.
The MODE display changes to “P-SCAN”
and the preset No. in the preset scan
operation is displayed in the preset No.
display.
* The currently stored stations are received
in order for 7 seconds or longer each.
Stations with poor reception are skipped,
and the next station is received.
When preset scan is performed in an FM
broadcast, FM stations are received as
follows:
FM1 (1 ➜ 6) ➜ FM2 (1 ➜ 6) ➜ FM3 (1 ➜
6) ➜ FM1 (1 ➜ 6)...
When preset scan is performed in an AM
broadcast, AM stations are received as
follows:
AM (1 ➜ 6) ➜ AM (1 ➜ 6) and so forth.
■ To cancel preset scan
1. Touch P-SCAN.
The P-SCAN display changes to “MODE”,
and the stations that were being received
when P-SCAN was touched are received
next.
Radio Operations
Instant station recall (ISR)
Instant station recall is a special radio preset
that instantly accesses a favorite radio station at
a touch of a button. The ISR function even
operates with the unit in other modes.
• The ISR function cannot be used when the 2-
ZONE function is in use.
• The factory default setting is “FM87.9MHz”.
1. Press the [I] button.
“ISR” appears on the display.
■ To return to the previous mode
Either press the [I] button again, or press the
[ROTARY] knob.
■ To store the station to “ISR”
In the radio mode, tune the station to store, and
touch and hold the [I] button for 2 seconds or
longer.
You will hear a long beep, and the station
currently being received is stored to ISR.