Filter
Top Products
DXZ945MP 17
English
Dolby Pro Logic II
Dolby Pro Logic II is a matrix decoding
technology in which updated digital matrix
technology is applied and Dolby Pro Logic is
further improved. Dolby Pro Logic II realizes
excellent 5.1 channel reproduction of Dolby
surround source as well as stereo sound
sources such as CDs, thereby causing a
surround channel to be full-ranged (20 Hz to 20
kHz) and become stereo. Therefore, you can
enjoy any stereo sources with dynamic sound of
5.1 channel. The Music Mode or Matrix Mode
can be selected according to a source to be
reproduced.
This product is manufactured under license from
Dolby Laboratories. “Dolby”, “Pro Logic” and
the double-D symbol are trademarks of Dolby
Laboratories.
Selecting the PL II menu
(Dolby PL II)
Select the MUSIC mode or the MATRIX mode
matched the source you are to play as the
Dolby Pro Logic II mode.
• The factory default setting is “OFF”.
■ MUSIC (music mode)
• This mode is suited for stereo sound sources
such as CDs.
• Another adjustment mode that enables more
detailed adjustment is also available as the
sound field spreads differently depending on
the state of the recorded music source. (See
page 42)
■ MATRIX (matrix mode)
• This mode is suited for sound sources such
as AM/FM radio.
■ OFF
• The Dolby Pro Logic II mode is not used, and
the AC-PROIII mode is used. For details on
the AC-PROIII mode, see “Selecting each
mode” (cf. page 39).
1. Press the [SOUND] button.
2. Touch Dolby PLII.
RTN
2 - ZONE
POSITION
OFF
OFF
ADF
P. EQ
OFF
OFF
A - MODE
Dolby PL
II
OFF
SOUND MENU
AC-Processor III Operations
3. Touch on the right of the display to
select the Dolby Pro Logic II mode.
RTN
OFF
Dolby PL II
The mode display is switched as follows:
MUSIC (music mode) ➜ MATRIX (matrix
mode) ➜ OFF (PL II off) ➜ MUSIC (music
mode)...
* For details on the volume adjustment of
the center speaker/sub-woofer, see page
40.
4. Touch RTN.
Selecting the position menu
With POSITION, you can select from 5 types it
takes for the sound to arrive from the speaker to
your seat position.
Also, the time alignment function allows pin-
point setting of speakers so that the same audio
effect can be obtained from each speaker up to
all listeners.
In the “Selecting each mode” procedure (cf.
page 39), set AC-PROIII to “PRO”.
• The factory default setting for POSITION is
“OFF” and for the position basic menu is
“FRONT”.
■ Position menu
This function is pre-stored with 5 position
menus. Select the desired menu to suit your
preference.
1. Press the [SOUND] button.
2. Touch POSITION.
RTN
2 - ZONE
POSITION
OFF
OFF
ADF
P. EQ
OFF
OFF
A - MODE
Dolby PL
II
OFF
SOUND MENU