Filter
Top Products
DXZ945MP 19
English
10.Repeat steps 7 to 9 to adjust the desired
item.
11. When you have finished adjusting each item,
touch RTN.
The display returns to the original screen,
and “” is displayed at the BASIC or USER
display.
Operation so far completes position
adjustment. To continue to store the
adjustment values to the position user menu,
perform the following.
12.Touch and hold RTN for 1 second or longer.
The position menu list is displayed.
13.Touch and hold the user memory you want
to store the adjustment values to for 2
seconds or longer.
You will hear a long beep, and the values
you adjusted up to step 10 are stored to the
position user menu.
If you hear a short beep, the adjustment
values up to step 10 are discarded. Adjust
these values again as required.
14.Touch RTN.
15.Press the [SOUND] button to return to the
original mode.
∗ To select a stored user memory, touch B/U
to display “USER” and touch of on
the user memory No.
Selecting the VSE menu
VSE (Virtual Space Enhancer) allows you to
compensate the sound pressure balance inside
your car so that the same sound effect can be
obtained whichever seat you are sitting in as
proved in compensation simulations.
In the “Selecting each mode” procedure (cf.
page 39), set AC-PROIII to “STD”.
• The factory default setting for VSE is “OFF”
and for the VSE basic menu is “FLAT”.
■ VSE basic menu
Six basic menus are pre-stored to this function.
Select the basic menu to suit your preference.
1. Press the [SOUND] button.
2. Touch VSE.
RTN
2 - ZONE
VSE
OFF
OFF
ADF
P. EQ
OFF
OFF
A - MODE
Dolby PL
II
OFF
SOUND MENU
AC-Processor III Operations
3. Touch on the ON/OFF display.
The VSE effect is toggled ON/OFF.
BASIC
B/U
BU
RTN
1
26
OFF
FLAT
VSE MODE
When VSE is set to “OFF”, the VSE setting
is not reflected on the music source. This
completes the VSE setting. Press the
[SOUND] button to return to the original
mode.
4. Touch B/U to select “BASIC”.
BASIC
B/U
BU
RTN
1
26
ON
FLAT
VSE MODE
Each touch of B/U toggles between “BASIC”
and “USER”.
5. Touch on the VSE basic menu No. to
select the desired VSE basic menu.
VSE basic menus
6. Press the [SOUND] button to return to the
original mode.
Adjusting/storing VSE (user
memory)
User memory settings allow you to compensate
the sound pressure distribution to suit your
preference based upon the VSE basic menu.
Up to six user adjustments can be stored.
DIFFUSE:
Adjusts the deviation in diffused sound
pressure.
CAR WIDTH:
Adjusts the deviation in sound pressure along
the width of the car.
No.
Function Name
Description
1 FLAT
Sound source flat
equalizing
2 BASS BOOST Bass tones enhanced
3 HIGH BOOST
Mid and treble
enhanced
4 IMPACT
Low and treble
enhanced
5 ACOUSTICAL
Mid tones (human
voice) enhanced
6 SMOOTH
Produces smooth-
sounding tones.