Filter
Top Products
TV 17
TV video settings
The video settings page lets you choose a video connector and
fine-tune video characteristics.
To open the Video settings page
Click the Setup button in the Television control panel,
then click the Video tab.
Selection Function
Connector Choose Analog TV Tuner, Composite or S-Video input.
• If you choose Composite or S-Video, you must specify
the Broadcast Standard.
Broadcast
Standard
Choose the broadcast standard: NTSC, PAL, or SECAM.
Video
Properties
Color
Adjusts the amount of color in the image.
Brightness
Adjust the amount of white in the image.
Contrast
Adjusts the gradation of tones between light and dark
areas.
Tint (only available for NTSC)
Adjusts the balance of red-to-blue in the image.
Gamma Adjusts the color brightness of your display. The higher
the gamma, the higher the brightness and contrast,
maximum being a flat (unmodified) setting).
Reset Sets all values on this page to their default values.