Filter
Top Products
MANUAL
V1.0
OPTIONAL FUNCTIONALITIES > p. 57
RECORDING PROCEDURE
Connect the AV cable to an audio source (hi-, turntable, boombox, etc.) and then the other end to the IN connec-
tor of the DVR Station or DVR Travel Adapter.
In the pre-recording screen, adjust the recording level using / ( / only adjust the headphones’ volume,
not the recording volume).
Choose the Start recording menu item to start recording.
You can pause and resume your recording at any time.
Tap on to stop recording.
You can also start recording to a new le directly by choosing the Save le and start a new recording menu item
while you are recording.
Be careful that the source audio is supplying a line-level and not an amplied signal (turning down the volume of
the player will work if you are using the headphone out signal of your audio device). A signal that is amplied too
much will result in a terribly distorted recording.
1.
2.
3.
4.