Filter
Top Products
MANUAL
V1.0
OPTIONAL FUNCTIONALITIES > p. 52
9.4 seTTIng The sCheduler
From the Home Screen, tap on the Scheduler icon to highlight it and tap on it again to enter the
Scheduler screen.
MAIN STEPS
Tap on the line you want to edit to highlight it, then tap on it again to start editing.
Set each line to the desired date, time (and channel if you are using the infrared emitter to control a VCR,
cable box or satellite receiver).
Select the Edit program title menu item to dene a title for your scheduled recording, (see Using the Virtual
Keyboard).
Select the Validate selected program menu item to save the changes for this program.
Do not turn off the ARCHOS device! Make sure the ARCHOS is in stand-by mode at the scheduled time for
the recording (connected to the DVR station or to the DVR Travel Adapter and a wall outlet).
SCHEDULER SETTINGS
This screen allows you to adjust the scheduling
parameters to your personal taste.
You can access the TV Scheduler Settings
screen via the Settings menu item in Scheduler
screen.
Tap on a parameter to highlight it, then use
/ to select a different setting.
•
•
•
Pre-record
This is a safety margin added to the beginning of a scheduled recording which was set via the My Yahoo!® TV
scheduler of your personal Yahoo!® calendar. It affects ONLY these recordings. This is just in case the clocks
between your ARCHOS device and the broadcast station are different or if the broadcast station starts earlier
than expected.
-
1.
2.
3.
4.
5.