Filter
Top Products
MANUAL
V1.0
OPTIONAL FUNCTIONALITIES > p. 50
Widescreen
options: Auto/On/Off.
If your tuner (cable box, satellite receiver, etc.) outputs a video signal in widescreen, you can force the
ARCHOS to recognize this signal.
This should be set to On if recordings show people that look unusually tall and thin. But in most cases you can
just leave it on Auto.
-
-
-
Bitrate
options: 500kb/s, 1000kb/s, 1500kb/s, 2000kb/s, 2500kb/s.
use this to set the encoding quality.
the higher the encoding rate, the higher the image quality but also more hard drive space will be used.
-
-
-
Sampling
options: 32kHz, 48kHz.
the sound sampling rate. The higher value gives a higher quality sound but will take up more space on the hard
drive.
-
-
Brightness
adjusts the recorded image brightness.-
Contrast
adjusts the recorded image contrast.-
Saturation
use this to de-emphasize or saturate the colors in the recorded image.-
Hue
changes the color spectrum in the recorded image.-
Reset
changes the above settings to the default settings.-
COPY PROTECTION
The ARCHOS recording system is designed to respect the Macrovision™ copyright protection system.
If the source of your video is copy-protected, the device will record in protected mode.
You will see a ‘P’ icon on the recording screen (not during playback), indicating that the le will be a protect-
ed le.
Protected les can only be played back on the ARCHOS device that created them, and not on a computer.
The playback of protected les is also limited to the built-in LCD screen and cannot be displayed on an exter-
nal television.
•
•
•
•
•