Filter
Top Products
MANUAL
V1.0
USB CONNECTIONS > p. 36
7. usb COnneCTIOns
7.1 COMPuTer COnneCTIOn
‘WINDOWS MEDIA DEVICE’ OR ‘PC HARD DRIVE’
There are two connection modes for your ARCHOS device to connect to your computer. When your ARCHOS
device is turned on and you connect it to a computer, a screen will pop up on the ARCHOS asking you to
choose the connection mode to be used for this connection (see next section).
The ARCHOS can be connected as a ‘Windows Media Device’ if you have Windows Media
®
Player 10
(WMP10) or higher installed on your computer. Otherwise, it can connect as a ‘PC Hard Drive’.
You can change your preferred USB connection mode in the System settings screen (see: System Settings).
This means that your preferred connection mode will be highlighted by default when you connect your
device to a computer. To access the System Settings screen, tap on from the Home Screen, then select the
System icon.
CONNECTION STEPS
Turn on your ARCHOS device.
Plug the supplied ARCHOS USB Cable into the ARCHOS device (b port).
Plug the ARCHOS USB Cable into your running computer.
Your ARCHOS device will ask you to choose the USB connection mode: select the one that you want to use
and tap on it.
wIfI
b
Computer
turned on
USB
2
4
3
1
Refer to the following paragraphs for details on your particular operating system.
•
•
•
1.
2.
3.
4.