Filter
Top Products
MANUAL
V1.0
OPTIONAL FUNCTIONALITIES > p. 54
If a personal calendar recording event does not nd the station name in your list of channels, it will put the
event into the scheduler and mark it with a ?, indicating that you must assign a channel number to the
name. Tap on the line containing the ? and select the Set Channel menu item. You can now scroll through
the channel numbers and assign a number to the station name for that event. You only have to do this once.
Your ARCHOS device will keep the station name and its channel number.
9.5 The Infrared eMITTerInfrared eMITTer
The DVR Station has a high-powered infrared LED at the front. It
allows your ARCHOS device to communicate with your tuner (VCR,
cable or satellite box), so that it can turn it on and off, and change
channels on it.
This is a one time step to set your ARCHOS device to send the cor-
rect infrared codes to control your tuner. If you do not plan on mak-
ing scheduled recordings, then you do not need to set the infrared
emitter code.
Before beginning this procedure of setting the emitter code, your
device must be connected to the DVR Station, which must be pow-
ered with the charger/adapter.
•
•
•
The infrared control works through the reec-
tion of the infrared signal within a room.
In order to improve the reception of this infra-
red signal on your tuner (VCR, cable or satellite
box), you could rearrange the position of the
DVR Station and/or the tuner such that there
are more reective surfaces (furniture, a wall,
etc. - see diagram).
Good communication between the DVR Station
and your tuner also depends on the sensitivity
of your tuner’s IR receiver.
•
•
•
SETTING THE IR EMITTER CODE
From the Home Screen, tap on to access the Setup Screen. Tap on the TV Control icon to highlight it and tap
on it again to display the TV control Settings screen.
•