Filter
Top Products
Using the Metronome Function
ZOOM H2
69
Making metronome/
pre-count optional settings
You can control the type of click sound,
dynamic pattern, and volume level for the
metronome/pre-count function.
HINT
If you start the playback fanction before
carrying out the steps below, you can select
the sound and pattern while listening to the
actual metronome sound.
1.
Bring up the main menu screen.
At the stereo mode or 4-channel mode top
screen, press the
4
(MENU) key.
2.
Bring up the METRONOME
screen.
Repeatedly press the
3
(REW)/
2
(FF)
keys to move the cursor to "METRONOME"
and press the
5
(REC) key. The screen for
making metronome settings comes up.
3.
Select the sound for the
metronome/pre-count.
Move the cursor to "SOUND" and press the
5
(REC) key to bring up the METRONOME
SOUND screen.
At this screen, you can select the metronome/
pre-count sound from the following choices.
●
BELL
Normal metronome sound (combination of
bell sound and click sound)
●
CLICK
Click sound
●
STICK
Stick beating sound
●
COWBELL
Cowbell sound
●
HI-Q
Synthesizer type click sound
Move the cursor to the desired item and press
the
5
(REC) key. The setting is accepted and
the METRONOME screen appears again.
4.
Select the metronome dynamic
pattern.
Move the cursor to "PATTERN" and press the
5
(REC) key to bring up the
"METRONOME PATTERN" screen.
H2-E.fm 69 ページ ２００７年７月１１日 水曜日 午後３時１９分