Filter
Top Products
Convenient Recording Functions
ZOOM H2
41
At this screen, you can set the number of
seconds by which the stop of recording is
delayed after the input level drops below the
threshold level. Use the
3
(REW)/
2
(FF)
keys to select the setting (0 – 5 sec) and
then press the
5
(REC) key to return to the
AUTO REC screen.
Next, set the stop level. On the AUTO REC
screen, move the cursor to STOP LVL and
press the
5
(REC) key. The AUTO REC
STOP LVL screen comes up.
While checking the current actual sound
level using the input level indication on the
screen, use the
3
(REW)/
2
(FF) keys to
move the stop level indicator to a suitable
point.
When the setting is complete, press the
5
(REC) key to return to the AUTO REC
screen. Then press the
4
(MENU) key
repeatedly to return to the main menu
screen.
HINT
In 4-channel mode, the front and rear signals
are mixed for level indication.
6.
Use the auto record function.
At the top screen, press the
5
(REC) key
once. The H2 goes into the recording
standby condition, and the indication "Wait
For Signal..." appears on the display.
When the input signal exceeds the start
level in this condition, recording starts.
Current input level Stop level
Stop level setting value
START LVL
Auto record function
Level
Time
0 – 5 sec
STOP LVL
Recording starts when
signal exceeds start level
When signal drops
below stop level,
recording stops after
a preset delay interval
Record
Press
5
(REC) key
H2-E.fm 41 ページ ２００７年７月１１日 水曜日 午後３時１９分