Filter
Top Products
4-Channel Mode Recording
ZOOM H2
28
Shows the battery
status.
Shows the playback time
of the current file or the
recording time in
hours/minutes/seconds.
When repeat playback or auto
record is active, the respective
symbol is shown here.
Shows that the H2 is operating
in 4-channel mode.
Normally, the name of the
file pair that is played back
is shown here. During
recording standby and
recording, the name of the
file pair used for recording
is shown.
In 4-channel mode, two
WAV format files (one each
for front and rear) are
handled as a set. The
indication "SRxxxF/R.WAV"
(where xxx is a number
from 000 to 499) refers to
the front stereo file
"SRxxxF.WAV" and rear
stereo file "SRxxxR.WAV"
pair.
Indicates the available time
for recording, according to
the currently selected
recording mode (file
format, quantization,
sampling frequency).
Shows the current
operation status of the
recorder. There are five
different indications for
playback, pause, stop,
recording standby, and
recording.
Indicate the current input
level or output level. At the
rightmost end of the scale is
a clip indicator which lights
up when signal clipping
(leading to distortion and
sound breakup) occurs. If
clipping has occurred at least
once during playback or
recording, the clip indicator
remains lit until the end of
playback/recording.
Counter
Recorder status
Level meters
Battery indicator
Remaining recording time
File name
4-channel mode symbol
Option function symbol
H2-E.fm 28 ページ ２００７年７月１１日 水曜日 午後３時１９分