Filter
Top Products
Stereo Mode Recording
ZOOM H2
20
Setup example (2):
External mic
To use an external mic for recording, connect
the mic to the [EXT MIC IN] jack. If a mono
mic is used, only the left channel signal will
be recorded.
Setup example (3):
External component
To record the signal of an external source
component such as a CD player, connect the
output of the component to the [LINE IN]
jack. Use the supplied Y cable or a cable with
a stereo mini phone plug at both ends. Note
that direct input of the signal from instruments
such as an electric guitar or bass is not
supported.
HINT
• If anything is plugged into the [EXT MIC IN]
jack or [LINE IN] jack, the built-in mics are
deactivated.
• If equipment is connected both to the [EXT
MIC IN] jack and [LINE IN] jack, the [LINE IN]
jack has priority.
External mic
H2
[EXT MIC IN] jack
CD player
H2
[LINE IN] jack
Glossary
On-mic/Off-mic
On-mic refers to recordings made with the microphone close to the sound source, while off-mic is a
recording technique that puts more distance between sound source and microphone, to capture
ambience and room reverberations as well.
H2-E.fm 20 ページ ２００７年７月１１日 水曜日 午後３時１９分