Filter
Top Products
ZOOM H2
67
Using the Metronome Function
The H2 has a built-in metronome that can be used as a guide rhythm during recording. You can
have the metronome operate only during recording and turn it off during playback, or you can use it
to provide a pre-count before recording.
Switching the metronome/
pre-count on and off
The steps for turning the record/playback
metronome sound and pre-count sound on and
off and for setting the tempo are described
below.
NOTE
The steps for turning the metronome sound
and pre-count sound on and off cannot be
performed while the recorder is operating.
Stop recording or playback before carrying out
these steps.
1.
Bring up the main menu screen.
At the stereo mode or 4-channel mode top
screen, press the
4
(MENU) key.
2.
Bring up the METRONOME
screen.
Repeatedly press the
3
(REW)/
2
(FF)
keys to move the cursor to "METRONOME"
and press the
5
(REC) key. The screen for
making metronome settings comes up.
3.
Switch the metronome sounds
on or off.
Move the cursor to "CLICK" and press the
5
(REC) key to bring up the METRONOME
CLICK screen.
At this screen, you can specify how the
metronome works: "OFF" (always off), "O
/
R
" (on during recording and playback), "O
"
(on during recording only), and "R
" (on
during playback only)
Move the cursor to an item and press the
5
(REC) key to select the setting. The setting is
accepted and the METRONOME screen
appears again.
4.
Switch the pre-count on or off.
At the METRONOME screen, move the
cursor to "PRECOUNT" and press the
5
(REC) key. The METRONOME PRECOUNT
H2-E.fm 67 ページ ２００７年７月１１日 水曜日 午後３時１９分