Filter
Top Products
62
If the AV amplifier (receiver) has an
MPEG audio decoder
If you connect the component using an optical digital
cord, set “SOUND MODE” to “NORMAL” (page 43).
Otherwise no sound will be heard.
Notes on playing DVDs with a DTS
sound track
• If you connect the player to audio
component without a DTS decoder, set
“DTS” to “OFF” in “CUSTOM SETUP”
(page 67). If you set it to “ON,” a loud noise
may come out from the speakers, affecting
your ears or causing the speakers to be
damaged.
• If you play a DTS sound track with
“DTS”set to “ON,” you will hear no sound
from the headphones of this player and
[DTS] appears on the Status Bar.
Watching a Video on the
TV
1 Turn on your TV.
2 Switch the input selector on the TV
to the player.
When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel.
3 Place the disc on the tray with the
playback side facing down.
4 Press NX.
If you use the remote, press H. The
player starts playback. Adjust the volume
on the TV or the amplifier (receiver).
To change the color system of the
player to match that of your TV
(Hong Kong, China and tourist models
only)
Set the NTSC/PAL switch on the player to
match your TV or monitor’s color system.
Notes
• This does not change the color system of the DVD
disc itself.
• If the picture of the VIDEO CD is noisy, try
switching the NTSC/PAL switch.
Item Select Page
MPEG MPEG 66
D