Filter
Top Products
52
Note
Do not connect your player to a VCR. You may not receive a clear image on the TV screen if you pass the player
signals via the VCR.
Step 3: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. The surround effects
you will enjoy depend on the connections and components you use.
Select a connection
Select one of the following connections, through .
* Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-D symbol are
trademarks of Dolby Laboratories.
**Except for the USA and Canadian models
*** “DTS” is a registered trademark of Digital Theater Systems, Inc.
Connection Components to be connected
(page 53)
TV (stereo)
(page 54)
Stereo amplifier (receiver)
(having L and R audio input jacks only, or having a digital input jack)
•2 speakers
(front L and R)
(page 54)
MD deck/DAT deck
(page 56)
AV amplifier (receiver) with a Dolby* Surround Pro Logic decoder
(having L and R audio input jacks only, or having a digital input jack)
•3 speakers
(front L and R, and rear (monaural))
•6 speakers
(front L and R, center, rear L and R, subwoofer)
(page 58)
AV amplifier (receiver) having a Dolby Digital, MPEG** audio, or
DTS*** decoder, and a digital input jack
•6 speakers
(front L and R, center, rear L and R, subwoofer)
VCR
CD/DVD player
TV
Connect directly.
A
D
A
B
B
C
D