Filter
Top Products
44
Selecting the sound mode using the
Control Menu
1 While pressing SHIFT, press V twice
during playback.
The Control Menu is displayed.
2 Press v/V to select (SOUND
MODE), then press ENTER.
The options for “SOUND MODE”
appear.
3 Press v/V to select the desired sound
mode.
4 Press ENTER.
5 While pressing SHIFT, press V (twice for
a DVD) to turn off the Control Menu.
To reset the sound mode setting
In Step 3, select “NORMAL.”
Using the remote
Press SOUND MODE repeatedly to select
the desired sound mode.
zYou can also display the Control Menu by
pressing DISPLAY. Use X/x instead of v/V.
Notes
• The modes you can select depend on whether an
audio cord is connected or not. If an audio cord is
connected, you cannot select “MEGABASS1” or
“MEGABASS2.”
• The sound mode setting is stored in the player
individually depending on whether the audio cord is
connected or not. The sound mode selected when the
audio cord is connected or not depends on the
conditions required by the respective sound modes.
xV-SUR (Virtual Surround) i1/V-SUR
i2
Uses sound imaging to create virtual speakers
from the sound of headphones (L, R) as
shown in the illustrations below. The sound
imaging effect makes you feel just like you
are listening to the sound from speakers
surrounding you.
i1 is effective when using inner-ear
headphones.
i2 is effective when using open-air
headphones such as the MDR-F1.
• Multiple audio format, such as Dolby
Digital 5.1-channel
• Stereo sound, such as PCM, Dolby Digital
(stereo)
12
(
27
)
NORMAL
NORMAL
V
–
SUR 1
18
(
34
)
C 00:09:57
PLAY
DVD
V
–
SUR 2
DISPLAY
ENTER
X/x
SOUND
MODE
L
C
R
LS RS
LR