Filter
Top Products
56 57
5. Write down the displayed password from the dialog box (as illustrated below).
Linksys WAP54G
Follow these steps for obtaining the hexadecimal WEP key from the WAP54G:
1. Open a web browser and connect to the access point.
You connect to the access point by entering the access point’s IP address in the location
bar of your web browser. If you do not know the IP address of the access point, please
refer to the software or manual that came with the access point in order to determine the
IP address. After successfully logging in, you will see a page similar to the following:
2.Write down the Wi-Fi network name in the MAC Address SSID fi eld.
3.Click Edit Security Settings to access the WEP setup page. When WEP Security is
enabled, you can easily view the keys.
11
Section 11: Appendices Section 11: Appendices